Directory contents

DS1624_8	RiscPCB file
ReadMe		This file
SoldSide	The solder side of the board as a draw file
SilkSide	The "silk screen" of the board as a draw file

Note that in both cases the view is from the component side. So the
finished board should have text the right way round on the solder side
(i.e the reverse of the draw file view).

If you want to alter the PCB layout you will need RiscPCB, by
Terry Swanborough. This is available from his web site at:

http://www.idealist.demon.co.uk/

SJM	Mon 4th May 1998
